Changing Transmission Oil

4 Speed Automatic 01M

- Remove center noise insulation tray.

- Remove noise insulation from left long member.

- Place container under transmission.





- Remove ATF level plug from oil pan.





- Remove overflow line (arrow 2) through level hole.

- Drain ATF.

- Install overflow line.

- Install level plug and tighten hand-tight.

- Fill with 3 ltr. (3.2 qt) of ATF through filler line using VAG 1924.

- Start engine and shift through all selector lever positions with vehicle stationary.

- Check and top up ATF level.