Temperature Flap Cable, Installing and Adjusting

Cables, Installing And Adjusting

Temperature flap cable, installing and adjusting






Prerequisites:

- Heating and ventilation controls are installed.
- Connecting duct removed.

Adjusting

- Turn temperature rotary control knob to left onto stop.
- Attach center wire of cable -1- to the temperature flap lever -2-.
- Push temperature flap lever -2- to stop - arrow A- and secure outer cable -1- with clip -3-.
- Turn temperature rotary control knob to left and right onto stops.
- When turning the rotary control knob, both end stops must be reached.