Upper C-Pillar Trim, Removing and Installing (Jetta Without Side Curtain Protection)

Upper C-pillar Trim, Removing And Installing (Jetta Without Side Curtain Protection)

NOTE: Removal and installation is described for right side of vehicle. same instructions apply for removal and installation for left-hand side.

Removing
- Remove rear shelf.
- Remove seal in area of trim.
- Remove cover cap - 2 - and remove bolt - 3 - (40 Nm).
- Remove belt relay - 1 -, washer - 4 - and spacer - 5 -.







- Remove trim from C-pillar.







Installing
- Installation is reverse of removal.