With Manufacturer Scan Tool

Diagnostic Trouble Code (DTC) Memory, Erasing (function 05)


NOTE: After DTC memory is erased, its contents are automatically output. If DTC memory cannot be erased, check DTC memory again and repair malfunction.


Prerequisites
- DTC memory checked. With Manufacturer Scan Tool
- All malfunctions repaired.

After successful DTC memory check:

Indicated on display:


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -5- to select "Erase DTC memory" function 05.

Indicated on display:


Rapid data transfer Q
05 Erase DTC memory


- Press -Q- button to confirm input.

Indicated on display:


Rapid data transfer ->
DTC memory is erased!


DTC memory is erased.

- Press -> button.

Indicated on display:


Rapid data transfer HELP
Select function XX


NOTE:
- If this appears in the display, the test sequence is faulty.


WARNING!
DTC memory was not checked


- If this appears in the display, the test sequence is faulty.


Rapid data transfer ->
DTC memory was not checked


- Follow test sequence exactly: first check DTC memory, repair malfunctions) if necessary, then erase.

After erasing the DTC memory its contents will automatically be indicated. If the DTC memory cannot be erased, again check DTC memory and repair malfunctions.