A/C Clutch -N25- (Sanden), Removing And Installing

A/C Clutch -N25- (Sanden), Removing And Installing


Special tools, testers, measuring instruments and auxiliary items required







- Special tool 3212 (or equivalent)
- Two arm puller
- Three arm puller
- Depth gauge
- Torque wrench (5 - 50 Nm)


NOTE:
- It is not necessary to discharge the refrigerant circuit to remove and install the A/C clutch.
- Remove ribbed belt See Repair Manual, Engine Mechanical, Repair Group 13.
- On Diesel engines, remove charge air cooler 1.9 Liter TDI 4-Cyl. Diesel Engine Mechanical.