Lower A-Pillar Trim, Removing and Installing

Lower A-pillar Trim, Removing And Installing

Removing
- Remove hood release lever.







- Release cover - 1 - with clips - 2 - from instrument panel - 3 -.
- Remove cover - 1 - - arrow -.







- Remove bolts - 2 -.
- Carefully remove glove compartment - 1 - from instrument panel - 3 - - arrow -.







- Unclip trim - 1 - at top from A-pillar - 2 - and loosen from sill panel trim - 3 - at bottom.

NOTE: Trim - 1 - is secured with two metal clips - 4 -.

Installing
- Installation is reverse of removal.

NOTE: Before installation, securing clips and retaining clips must be checked for damage and replaced if necessary.