01N Automatic Transmission

Adjusting





- Loosen bolt -6-.
- Must be able to move support bracket -3- by hand in direction of arrow -5-.
- Move steering column down.
- Position setting bar 3352 A -item 4- between lever (for locking cable) and locking cable eye.
- Pull locking cable in direction of arrow -5- and tighten bolt -6- to 10 Nm (7 ft. lbs.).
- Remove setting bar.
- Check ignition key withdrawal after each adjustment of locking cable. Testing and Inspection
- Install steering column trim
- Install steering column switch.
- Install steering wheel with airbag.
- Install center console and extension.
- Removing selector lever handle. Shifter A/T
- Connect battery ground strap.
- Activate radio with code.