Support Control Arm Bushing, Replacing

Support control arm bushings, replacing





Special tools required





Fig. 1 Pulling rear bushing out

CAUTION: Always use protective jaw covers when clamping aluminum control arms in a vise.





Fig. 2 Bushing installed position
Dimension A 6° + 3°





Fig. 3 Pulling rear bushing in
- Insert bushing -A- in 3 2 mm recess in thrust piece 3346/1
- Pull bushing in onto stop





Fig. 4 Pulling front bushing out





Fig. 5 Pulling front bushing in
- Insert bushing -A- in 8 mm recess in thrust piece 3346/1.
- Pull bushing in onto stop.