Service Interval Display

Reset Service Reminder Indicator using the adjustment button for odometer and clock at instrument cluster

Service interval display must be reset at
Vehicle release inspection
Every oil change service
Every inspection service

Note: Every service event must be reset individually, since only the distance driven and the time counter of the currently displayed service event is reset.






Reset the display as follows:
- Turn off ignition.
- Press and hold the button -1- next to the speedometer.
- Switch the ignition on.

The message service OIL (for country code "D") or service OIL (remaining countries) appears in the odometer -2-.

- Release the button -1-.

Note:
By pressing the distance button once again, the display switches to service event INSP without resetting the service event OIL.
Observe that only the respective currently displayed service event is reset.





- Actuate adjustment button -1- next to tachometer.

Note:
On an instrument cluster with digital clock, the adjustment button must be turned to the right.
If the instrument cluster is equipped with an analog clock, the adjustment button must be pulled.

The service event indicated in the odometer, is reset and (- - -) appears in the display.

- Turn off ignition.

After resetting the Service Reminder Indicator, the driven daily distance or the next service event is displayed again.

Note
Observe that only the respective currently displayed service event is reset.
Repeat the steps to reset another service event.