Cruise Control Vacuum Vent Valves - Remove/Install

Group: 96

Number: 94-01

Date: Nov. 15, 1994

Subject:
Cruise control
Vacuum vent valves, removing/installing

Model(s):
Golf III / GTI / Jetta III / Cabrio from 1993 m.y.

File this Technical Bulletin in Repair Manual No. W42 011 294 117

The following updated Repair Manual page will be integrated into the next Repair Manual update.

The page that follows supersedes page 96-23 in the current (04.94 edition) Repair Manual.

Cruise Control System, assembly

Vacuum vent valve, removing/installing

Removing:

- Remove driver's side dash panel trim. See Repair Manual, Body-Exterior,
Body-Interior or Body-Cabrio, Repair Group 70.

Vacuum Vent Valve, Removing/Installing:

- Remove wiring connector and vacuum hose from vent valve -1-.

- Unscrew vent valve -1- from bracket.

Installing:

- Screw vent valve into bracket to stop.

- Using pedal, pull vent valve back to pedal rest position.

^ Vacuum vent valve is now adjusted

- Reconnect wiring harness connector and vacuum hose.