Clutch Cable Compressed

1. Make sure clutch cable adjustment mechanism is compressed.
2. Coat clutch cable suspension point at the clutch pedal with grease.

Clutch Cable:

3. Press the clutch cable through the bulkhead and suspend in front recess of the clutch pedal while making sure that the load plate is installed on the clutch cable (arrow).
4. Route the clutch cable and end piece through the bracket on the transmission and through the release shaft lever while taking care not to damage the plastic sleeve on the clutch cable.

Clutch Cable:

5. Hook attachment parts onto release shaft lever (image shows vehicle without balance weight).
6. Suspend the clutch cable in wire holder.
7. Install the over-center spring. Clutch Pedal Assembly
8. Depress the clutch cable several times.
9. Check the operation of the adjustment mechanism.