Rear Seat

Child Seat Restraint Anchorage, Rear, Installing




1 - Cap
^ Part No. 443 887 301 B

2 - Bolt
^ Part No. N 969 108.01
^ Torque to: 23 Nm (17 ft lb)

3 - Bracket
^ Part No. 443 887 269

4 - Spacer
^ Part No. 1H5 858846

5 - Rear filler panel trim
^ Holes for anchorage points are pre-drilled (3 locations) and covered by trim panel.
^ Locate holes by hand from top and make small cut in material to allow installation of anchor- age components.

6 - Rear filler panel sheet metal
^ With pre-drilled holes for anchorage points

7 - Washer-nut
^ Part No. N 989 514.01
^ One piece

8 - Rivet
^ Part No. N 905 763.01
^ Two per washer-nut -7-
^ Install from below

CAUTION: Part numbers are for reference only. Always check with Parts Department for current parts in formation.