A/T - Valve Body Modifications
84VW02 Applies To Convertible, Jetta Rabbit, SciroccoGroup
38
Subject
Automatic Transmission 010
Part Identifier
Key Points
Modifications
A-100
Number
84-02
July 13, 1984
Following modifications are now used on automatic transmission 010:
Valve body assembly marking
Valve body assembly is marked with identification tag (arrow) screwed to transfer plate..
Note
Identification tag must remain on valve body assembly during repairs.
Deletion of Spring Washers
Spring washer are no longer used at following locations:
- detent spring to transmission housing
- oil pump to transmission housing
- end plate to valve body assembly
- support plate to transfer plate
- transfer plate to valve body assembly
- oil strainer to transfer plate
- oil pan to transmission housing
- support tube to final drive
- speedo drive to final drive
- oil filler pipe to transmission
CAUTION
Bolts/nuts which use spring washers originally must be reinstalled with spring washers.
1st reverse gear brake apply valve modification