A/C - Corrections to Aftermarket Kit Installation
84VW1Applies To RABBIT
1983/84
Group
87
Subject
Aftermarket A/C installation instructions
Part Identifier N/A
Key Points
Corrections to A/C installation instructions
C
Number
84-01
June 28, 1984
In reference to page 8 of the aftermarket A/C kit (175 272 001) instructions, the following corrections must be made:
- do not discard the spacer washer located behind the alternator pulley (Bosch alternator only)
CAUTION
Removal of this spacer causes poor pulley alignment and allows alternator fan to free wheel
- replace split type lock washer with wave type lock washer P/N N012.233.3
- change alternator pulley part number 175 272 119A to 171 903 119A