Cold Start Vacuum Lock Valve - Replacing Connector
84VW1Applies To
Rabbit (Carburetor)
1984
Start of production to Nov.. 1983
Group
97
Subject
Cold start vacuum lock valve
Part Identifier 9716
Key Points Replacing connector
C
Number
84-01
February 21, 1984
Cold start vacuum lock valve, under ignition coil
On some vehicles, connector to cold start vacuum lock valve may become loose. Condition can cause cold engine driveability problems.
In response to this problem, replace double terminal connector with two single connectors with protective covers.
P/N 175 972 201 single connector
P/N 175 971 921 protective cover