Cold Start Vacuum Lock Valve - Replacing Connector

84VW1

Applies To

Rabbit (Carburetor)

1984

Start of production to Nov.. 1983
Group


97
Subject

Cold start vacuum lock valve

Part Identifier 9716
Key Points Replacing connector


C
Number

84-01

February 21, 1984



Cold start vacuum lock valve, under ignition coil


On some vehicles, connector to cold start vacuum lock valve may become loose. Condition can cause cold engine driveability problems.

In response to this problem, replace double terminal connector with two single connectors with protective covers.

P/N 175 972 201 single connector
P/N 175 971 921 protective cover