M/T - Installing Locking Plate For 5TH Gear Shift Fork
83VW01Applies To RABBIT, JETTA,
CONVERTIBLE,
PICKUP, SCIROCCO
Group
35
Subject:
5-Speed Manual Transmission 020 Part Identifier N/A
Key Points
Installing locking plate for 5th gear shift fork
A 054
Number
83-02
May 6, 1983
Locking plate, installing
- support shift fork with appropriate tools approx.. 12 mm thick (e..g. 2 open-end wrenches larger than 19 mm) as shown in illustration
CAUTION
Do not squeeze lock plate and shift fork together with pliers as shown in repair manual microfiche on page 35.41 or 35.42
PROTECT CASE SEALING SURFACE FROM DAMAGE
- drive locking plate on with tool 3097 as shown
Note
Tool 3097 is new and should be available in July