P0219

ENGINE OVERRUN







1. The DTC will be displayed, once detected over 4,000 rpm. in the Engine revolution. Also, the fuel injection will be suspended during the DTC to be detected and the fuel injection will be resumed when Engine revolution goes down less than 3,800 rpm.

NOTICE: The DTC aim is not for detecting the Engine over-run under abnormal operation of the system, but for storing in memory the high revolution of the Engine. (For detection of wrong shifting, etc.) Also, there is case in which "overrun" will be detected by misunderstanding the Engine revolution, with a noise to be generated by harness malfunction and its modification.