Air Bag(s) Arming and Disarming: Service and Repair
Air Bag(s) Arming and Disarming
* Wait at least 90 seconds after the ignition switch is turned off and the cable is disconnected from the negative (-) battery terminal before starting the operation.
(The SRS is equipped with a backup power source, if work is started within 90 seconds after disconnecting the cable from the negative (-) battery terminal, the SRS may be deployed.)
When the cable is disconnected from the negative (-) battery terminal, the memory will be cleared. Because of this, be sure to make a record of the contents memorized in each system before starting work. When work is finished, adjust each system to its previous state. Never use a backup power supply for the purpose of retaining the memory of vehicle electronic systems.
* If the vehicle is equipped with a mobile communication system, refer to the precautions in the INTRODUCTION information.