Installation (from 07/2011)

FRONT SUSPENSION: FRONT LOWER SUSPENSION ARM (for Hatchback RH Side): INSTALLATION

1. TEMPORARILY TIGHTEN FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY RH

(a) Install the front lower suspension arm sub-assembly RH with the bolt.

2. INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY

Installation (from 07/2011)

3. INSTALL FRONT WHEEL

Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)

4. STABILIZE SUSPENSION

(a) Lower the vehicle from the jack.

(b) Bounce the vehicle up and down several times to stabilize the suspension.

5. FULLY TIGHTEN FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY RH





(a) Fully tighten the 2 bolts.

Bolt A - Torque : 137 Nm (1397 kgf-cm, 101 ft-lbf)

Bolt B - Torque : 151 Nm (1540 kgf-cm, 111 ft-lbf)

6. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT

Front Wheel Alignment (for Hatchback) (from 07/2011)