Installation (from 07/2011)

SEAT BELT: REAR SEAT INNER BELT ASSEMBLY (for Hatchback LH Side): INSTALLATION

1. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

(a) Install the rear seat inner with center belt assembly LH with the bolt.

Torque : 41 Nm (420 kgf-cm, 30 ft-lbf)

NOTICE:
* Install the anchor plate with the arrow mark facing forward.
* Do not place the anchor plate over the convex area of the floor panel.





Text in Illustration





(b) Connect the connector.

2. INSTALL REAR SEAT CUSHION COVER WITH PAD SUB-ASSEMBLY (for Fold Down Seat Type) Installation (from 07/2011)

3. INSTALL REAR SEAT CUSHION COVER WITH PAD SUB-ASSEMBLY (for 60/40 Split Seat Type) Installation (from 07/2011)