Installation (from 07/2011)

SEAT BELT: REAR CENTER SEAT OUTER BELT ASSEMBLY (for Hatchback): INSTALLATION

1. INSTALL REAR CENTER SEAT OUTER BELT ASSEMBLY

(a) Check the angle of inclination required to lock the retractor.





(1) Gently incline the retractor from its initial position. Check that the belt does not lock when the retractor is inclined 15° or less in any direction. Also, check that the belt locks when the inclination of the retractor is 45° or more.

Text in Illustration





NOTICE:
Do not disassemble the retractor.

If the operation is not as specified, replace the rear center seat outer belt assembly.

(b) Engage the 2 hooks to install the rear center seat outer belt assembly.

(c) Install the bolt.

Torque : 41 Nm (420 kgf-cm, 30 ft-lbf)

(d) Install the shoulder anchor with the bolt.

Torque : 41 Nm (420 kgf-cm, 30 ft-lbf)

(e) Check that the ELR locks.

NOTICE:
Perform the check with the rear center seat outer belt assembly installed.

(1) With the belt installed, check that the belt locks when it is pulled out quickly.

If the operation is not as specified, replace the rear center seat outer belt assembly.

2. INSTALL REAR SEAT SHOULDER BELT COVER Reassembly (from 07/2011)

3. INSTALL ROOF HEADLINING ASSEMBLY (for 3 Door)

Installation (from 07/2011)

4. INSTALL ROOF HEADLINING ASSEMBLY (for 5 Door)

Installation (from 07/2011)