Installation (from 07/2011)

SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY (for Hatchback Front Passenger Side): INSTALLATION

1. INSTALL FRONT SEAT INNER BELT ASSEMBLY

(a) w/ Limit Switch:

(1) Install the front seat inner belt assembly with the bolt.





Torque : 41 Nm (420 kgf-cm, 30 ft-lbf)

NOTICE:
Do not place the front seat inner belt over the convex areas of the front seat with frame adjuster.

Text in Illustration





(2) Connect the connector.

(3) Install the front seat cushion inner shield. Reassembly (from 07/2011)

(b) w/o Limit Switch:

(1) Install the front seat inner belt assembly with the bolt.





Torque : 41 Nm (420 kgf-cm, 30 ft-lbf)

NOTICE:
Do not place the front seat inner belt over the convex areas of the front seat with frame adjuster.

Text in Illustration





(c) Engage the clamp.

(d) Connect the connector.

2. INSTALL FRONT SEAT ASSEMBLY

Installation (from 07/2011)

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Initialization (from 07/2011).

4. INSPECT SRS WARNING LIGHT

Diagnosis System (from 07/2011)