Installation (from 07/2011)

1NZ-FE EMISSION CONTROL: PCV VALVE (for Hatchback): INSTALLATION

HINT
Although the part name refers to the ventilation valve sub-assembly, this procedure is for the PCV valve.

1. INSTALL VENTILATION VALVE SUB-ASSEMBLY





Text in Illustration





(a) Install the ventilation valve sub-assembly.

(1) Apply adhesive to the 2 or 3 threads end of the bolt.

Adhesive:

Toyota Genuine Adhesive 1324, Three Bond 1324 or equivalent

(2) Install the ventilation valve sub-assembly.

Torque : 27 Nm (275 kgf-cm, 20 ft-lbf)

(b) Connect the ventilation hose to the ventilation valve sub-assembly.

2. INSTALL NO. 2 CYLINDER HEAD COVER Installation (from 07/2011)