Replacement (from 07/2011)

AXLE AND DIFFERENTIAL: FRONT AXLE HUB BOLT (for Hatchback): REPLACEMENT

HINT
* Use the same procedure for the RH side as for the LH side.
* The procedure listed below is for the LH side.

1. REMOVE FRONT WHEELS

2. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY Removal (from 07/2011)

3. REMOVE FRONT DISC Removal (from 07/2011)

4. REMOVE FRONT AXLE HUB BOLT

(a) Using SST and a screwdriver or the equivalent to hold the axle hub, remove the hub bolt.





Text in Illustration





SST : 09628-10011

5. INSTALL FRONT AXLE HUB BOLT

(a) Install the washer and the nut onto a new axle hub bolt, as shown in the illustration.





Text in Illustration





Recommended Service Nut:





HINT
Recommended thickness of the washer is 5 mm (0.197 in.) or more.

(b) Using a screwdriver or the equivalent to hold the axle hub, install the axle hub bolt by tightening the nut.

6. INSTALL FRONT DISC Installation (from 07/2011)

7. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY Installation (from 07/2011)

8. INSTALL FRONT WHEELS

Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)