Disassembly (from 07/2011)

BRAKE SYSTEM (OTHER): BRAKE MASTER CYLINDER (for Hatchback): DISASSEMBLY

1. REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY

(a) Fix the brake master cylinder in a vise between aluminum plates.





NOTICE:
Do not overtighten the vise.

(b) Using a pin punch 5 mm and a hammer, tap out the straight pin and remove the brake master cylinder reservoir sub-assembly.

(c) Remove the 2 grommets from the master cylinder reservoir sub-assembly.

2. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

3. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER