Removal (from 07/2011)

DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY (for Hatchback): REMOVAL

1. REMOVE FRONT FENDER LINER LH Removal (from 07/2011)

2. REMOVE HOOD LOCK ASSEMBLY

(a) Remove the 3 bolts and the hood lock.





(b) Disconnect the hood lock control cable.

(c) Disconnect the connector.

HINT
If the hood lock assembly is equipped with engine hood courtesy switch, disconnect the connector.

3. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

(a) Disengage the 3 claws and remove the hood lock control lever.





(b) Disconnect the hood lock control cable.

4. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY

(a) Using a screwdriver with its tip wrapped in protective tape, disconnect the clamps shown in the illustration.





Text in Illustration





(b) Pull the hood lock control cable from the engine compartment and remove it.