Installation (from 07/2011)

DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY (for Hatchback): INSTALLATION

1. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY

(a) Pass the hood lock control cable into the engine compartment.

(b) Connect the clamps as shown in the illustration.





Text in Illustration





2. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

(a) Connect the hood lock control cable to the hood lock control lever.

(b) Engage the 3 claws and install the hood lock control lever.

3. INSTALL HOOD LOCK ASSEMBLY

(a) Apply MP grease to the sliding areas of the hood lock.





(b) Connect the hood lock control cable.

(c) Install the hood lock with the 3 bolts.

Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)

(d) Connect the connector.

HINT
If the hood lock assembly is equipped with engine hood courtesy switch, connect the connector.

4. INSPECT HOOD SUB-ASSEMBLY Testing and Inspection

5. ADJUST HOOD SUB-ASSEMBLY Adjustments

6. INSTALL FRONT FENDER LINER LH Installation (from 07/2011)