Reassembly

CLUTCH: CLUTCH RELEASE CYLINDER (for C59): REASSEMBLY

1. INSTALL CLUTCH RELEASE CYLINDER KIT

(a) Coat a new piston with lithium soap base glycol grease as shown in the illustration.





(b) Install the piston and a new spring to the cylinder body.





NOTICE:
Do not damage the inside of the cylinder body.

HINT
Install the smaller end of the spring to the piston.

(c) Install a new boot to the push rod.

(d) Install the push rod to the cylinder body.

2. INSTALL RELEASE CYLINDER BLEEDER PLUG

(a) Install the bleeder plug to the cylinder body.

Torque : 8.4 Nm (86 kgf-cm, 74 in-lbf)

(b) Install the bleeder plug cap to the bleeder plug.