Reassembly

EXTERIOR PANELS / TRIM: REAR BUMPER: REASSEMBLY

1. INSTALL REAR BUMPER ARM LH

(a) Install the rear bumper arm LH with the 3 bolts.





Torque : 36 Nm (367 kgf-cm, 27 ft-lbf)

2. INSTALL REAR BUMPER ARM RH

HINT
Use the same procedure as for the LH side.

3. INSTALL NO. 1 REAR BUMPER REINFORCEMENT

(a) Install the No. 1 rear bumper reinforcement with the 4 nuts.





Torque : 36 Nm (367 kgf-cm, 27 ft-lbf)

4. INSTALL REAR BUMPER ENERGY ABSORBER

(a) Engage the 2 guides to install the rear bumper energy absorber.





5. INSTALL REAR UPPER BUMPER RETAINER LH

(a) Engage the 2 claws and install the rear upper bumper retainer LH.





(b) Install the screw.

6. INSTALL REAR UPPER BUMPER RETAINER RH

HINT
Use the same procedure as for the LH side.

7. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT LH

(a) Engage the 2 claws and install the No. 2 rear bumper side support LH.





(b) Install the screw.

8. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT RH

HINT
Use the same procedure as for the LH side.

9. INSTALL REAR BUMPER SIDE SUPPORT LH

(a) Engage the 3 claws and install the rear bumper side support LH.





(b) Install the 2 screws and grommet.

10. INSTALL REAR BUMPER SIDE SUPPORT RH

HINT
Use the same procedure as for the LH side.

11. INSTALL REAR BUMPER PAD LH

(a) Install a new rear bumper pad LH.





HINT
Stick the new bumper pad on the line marked on the rear bumper assembly.

12. INSTALL REAR BUMPER PAD RH

HINT
Use the same procedure as for the LH side.

13. INSTALL REAR BUMPER PAD

(a) Install new rear bumper pads.





HINT
* Stick the new bumper pads on the line marked on the rear bumper assembly.
* Use the same procedure for the RH side and LH side.

14. INSTALL REFLEX REFLECTOR ASSEMBLY LH

(a) Install the reflex reflector assembly LH with the screw.





15. INSTALL REFLEX REFLECTOR ASSEMBLY RH

HINT
Use the same procedure as for the LH side.

16. INSTALL REAR BUMPER SPOILER LH (w/ Rear Spoiler)

(a) Install the rear bumper spoiler LH with the 7 retainers.





(b) Install the clip and screw.

17. INSTALL REAR BUMPER SPOILER RH (w/ Rear Spoiler)

HINT
Use the same procedure as for the LH side.

18. INSTALL REAR NO. 1 SPOILER (w/ Rear Spoiler)

(a) Install the rear No. 1 spoiler with the 12 retainers and 5 clips.