Disassembly

U660E AUTOMATIC TRANSAXLE: SHIFT LEVER: DISASSEMBLY

1. REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY

(a) Remove the indicator light wire sub-assembly from the transmission floor shift assembly as shown in the illustration.





Text in Illustration





(b) Remove the position indicator bulb from the indicator light wire sub-assembly.

(c) Remove the position indicator bulb cap from the position indicator bulb.

(d) Separate the transmission control switch connector.





Text in Illustration





(e) Using a screwdriver, release the stopper.

(1) w/o Smart Key System





Text in Illustration





(2) w/ Smart Key System





Text in Illustration





(f) Using a screwdriver, disengage the locking lug of terminals, and pull the terminals out from the rear.

(1) w/o Smart Key System





(2) w/ Smart Key System





2. REMOVE SHIFT LOCK CONTROL ECU SUB-ASSEMBLY

(a) Disconnect the connector.





(b) Using a screwdriver, remove the shift lock control ECU sub-assembly.