Reassembly

SUSPENSION: FRONT SHOCK ABSORBER: REASSEMBLY

1. INSTALL FRONT SHOCK ABSORBER

(a) Install the front coil spring insulator lower LH onto the shock absorber assembly front LH.





(b) Install the front spring bumper LH to the piston rod.

(c) Compress the front coil spring LH using SST.

SST : 09727-30021

09727-00010

09727-00021

NOTICE:
Do not use an impact wrench. It will damage the SST.

HINT
Use 2 SST of the same type.





(d) Install the front coil spring LH to the shock absorber assembly front LH.

HINT
Fit the lower end of the front coil spring LH into the gap of the front coil spring lower LH.

(e) Install the front coil spring insulator upper LH as shown in the illustration.





(f) Install the front coil spring seat upper LH to the shock absorber assembly front LH with the mark facing the outside of the vehicle.





(g) Install a new front suspension support bearing LH as shown in the illustration.





(h) Install the front suspension support sub-assembly LH with the mark facing the outside of the vehicle.





(i) Temporarily tighten a new lock nut.

(j) Remove the SST slowly in order to release the coil spring.

SST : 09727-30021

09727-00010

09727-00021