Audio / Visual

AUDIO / VISUAL: STEERING PAD SWITCH: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

2. REMOVE STEERING WHEEL COVER LOWER NO. 2 Removal

3. REMOVE STEERING WHEEL COVER LOWER NO. 3 Removal

4. REMOVE STEERING PAD Removal

5. REMOVE STEERING PAD SWITCH ASSEMBLY

(a) Disconnect the pad switch connector from the spiral cable.





(b) Disengage the clamp and remove the 2 screws.

(c) Disengage the 4 pins and remove the steering pad switch assembly.