Removal

SEAT BELT: CHILD RESTRAINT SEAT ANCHOR BRACKET: REMOVAL

HINT
The procedures listed below are for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

HINT
Service Precautions

2. REMOVE REAR SEAT CUSHION ASSEMBLY Removal

3. REMOVE REAR SEAT HEADREST ASSEMBLY

4. REMOVE REAR SEATBACK LOCK COVER CAP Removal

5. REMOVE REAR SEATBACK ASSEMBLY LH Removal

6. REMOVE REAR SEATBACK ASSEMBLY RH Removal

7. REMOVE REAR DOOR SCUFF PLATE LH Removal

8. REMOVE REAR DOOR SCUFF PLATE RH Removal

9. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

10. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

11. REMOVE REAR SEAT SIDE GARNISH LH Removal

12. REMOVE REAR SEAT SIDE GARNISH RH Removal

13. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH Removal

14. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH Removal

15. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY

(a) Remove the bolt and disconnect the rear seat belt assembly outer.

HINT
Use the same procedures for the RH side and LH side.

(b) Remove the nut and disconnect the rear seat inner w/ center belt assembly RH.

HINT
Use the same procedures for the RH side and LH side.

(d) Disengage the 4 claws and the rear seat shoulder belt cover.

(e) Disengage the 5 claws, 4 clips, and the package tray panel assembly.

(f) Disconnect the connector and remove the package tray panel assembly.

16. REMOVE CHILD RESTRAINT SEAT TETHER ANCHOR BRACKET

(a) Remove the bolt and the child restraint seat tether anchor bracket.