Installation

2GR-FE ENGINE MECHANICAL: FRONT CRANKSHAFT OIL SEAL: INSTALLATION

1. INSTALL TIMING CHAIN COVER OIL SEAL

(a) Apply MP grease to a new timing chain case oil seal lip.





(b) Using SST and a hammer, tap in the timing chain case oil seal until its surface is flush with the timing chain cover edge.

SST : 09223-22010

SST : 09506-35010

Oil seal tap in depth:

0 to 1.0 mm (0 to 0.0393 in.)

NOTICE:
* Keep the lip free of foreign matter.
* Do not tap the timing chain case oil seal at an angle.

2. INSTALL CRANKSHAFT PULLEY Reassembly

3. INSTALL V-RIBBED BELT Installation

4. INSTALL V-BANK COVER SUB-ASSEMBLY Installation

5. INSTALL FRONT WHEEL RH