Installation

PARKING BRAKE: PARKING BRAKE CABLE: INSTALLATION

1. INSTALL PARKING BRAKE CABLE ASSEMBLY NO.3

(a) Connect the parking brake cable assembly No.3 to the parking brake equalizer.





(b) Fix the parking brake cable assembly No.3 with the clip.

(c) Install the parking brake cable assembly No.3 with the bolts, nut and clamp as shown in the illustration.

Bolt A - Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)

Bolt B - Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)

Nut - Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)





(d) Connect the parking brake cable assembly No.3 to the backing plate with the 2 bolts.





Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

2. APPLY HIGH TEMPERATURE GREASE Reassembly

3. INSTALL NO. 2 PARKING BRAKE SHOE ASSEMBLY Reassembly

4. INSTALL PARKING BRAKE SHOE ADJUSTING SCREW SET Reassembly

5. INSTALL NO. 1 PARKING BRAKE SHOE ASSEMBLY Reassembly

6. INSTALL PARKING BRAKE SHOE STRUT Reassembly

7. INSTALL PARKING BRAKE SHOE RETURN TENSION NO. 1 SPRING Reassembly

8. INSPECT PARKING BRAKE INSTALLATION Reassembly

9. INSTALL REAR DISC Reassembly

10. ADJUST PARKING BRAKE SHOE CLEARANCE Reassembly

11. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY LH Reassembly

12. INSTALL REAR WHEEL

Torque : 103 Nm (1,050 kgf-cm, 76 ft-lbf)

13. INSTALL PARKING BRAKE CABLE ASSEMBLY NO.4 Installation

14. INSTALL CONSOLE BOX ASSEMBLY

15. INSTALL CONSOLE PANEL SUB-ASSEMBLY UPPER

16. INSTALL CONSOLE BOX UPPER

17. INSTALL POSITION INDICATOR HOUSING ASSEMBLY

18. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY

19. ADJUST PARKING BRAKE PEDAL TRAVEL Adjustments