Installation

EXTERIOR: SIDE MOULDING: INSTALLATION

1. INSTALL OUTSIDE MOULDING

(a) Using a heat light, heat the body.

(b) Remove the protective tape from the body.

(c) Wipe off the stains with cleaner.

(d) Clean the moulding (if reusing the moulding).

(1) Using a heat light, heat the moulding.

(2) Remove the double-sided tape from the moulding.

(3) Wipe off the stains with cleaner.

(4) Apply new double-sided tape to the moulding as shown in the illustration.





(e) Using a heat light, heat the body and moulding.

(f) Remove the peeling paper from the face of the moulding and attach the moulding securely to the vehicle body.

NOTICE:
Be careful that dirt or foreign objects do not stick to adhesive part when removing the peeling paper.

(g) Push the moulding to the body.

NOTICE:
Do not apply excessive force onto the moulding. Instead, apply steady pressure with your thumbs.

(h) Front Door:

Install the outside moulding with the 2 nuts.

(i) Rear Door:

Install the outside moulding with the nut.