Reassembly

EXTERIOR: REAR BUMPER: REASSEMBLY

1. INSTALL REAR BUMPER ARM MOUNTING BRACKET LH

(a) Install the rear bumper arm mounting bracket LH withe the 3 nuts.





Torque : 55 Nm (560 kgf-cm, 40 ft-lbf)

2. INSTALL REAR BUMPER ARM MOUNTING BRACKET RH

HINT
Use the same procedure for the RH side and LH side.

3. INSTALL NO. 1 REAR BUMPER REINFORCEMENT

(a) Install the No. 1 rear bumper reinforcement with the 6 nuts.





Torque : 55 Nm (560 kgf-cm, 40 ft-lbf)

4. INSTALL REAR BUMPER ENERGY ABSORBER

(a) Engage the guide and 8 claws, and install the rear bumper energy absorber.





5. INSTALL REAR BUMPER SIDE SUPPORT LH

(a) Engage the 2 claws.





(b) Install the rear bumper side support LH with the screw.

6. INSTALL REAR BUMPER SIDE SUPPORT RH

HINT
Use the same procedure for the RH side and LH side.

7. INSTALL REAR BUMPER SIDE RETAINER LH

(a) Engage the 5 claws.





(b) Install the rear bumper side retainer LH with the 3 screws.

8. INSTALL REAR BUMPER SIDE RETAINER RH

HINT
Use the same procedure for the RH side and LH side.

9. INSTALL REAR LOWER BUMPER COVER

(a) Engage the 12 claws.





(b) Install the rear lower bumper cover with the 2 clips.