Reassembly

EXTERIOR: FRONT BUMPER: REASSEMBLY

1. INSTALL NO. 2 FRONT BUMPER STAY LH

(a) Engage the 2 claws and install the No. 2 front bumper stay LH.





Text in Illustration





(b) Install the bolt.

Torque : 3.6 Nm (37 kgf-cm, 32 in-lbf)

(c) Install the screw.

2. INSTALL NO. 2 FRONT BUMPER STAY RH

HINT
Use the same procedure for the RH side and LH side.

3. INSTALL FRONT BUMPER REINFORCEMENT

(a) Install the front bumper reinforcement with the 6 bolts.





Torque : 92 Nm (938 kgf-cm, 68 ft-lbf)

(b) Engage the 2 clamps.

4. INSTALL FRONT BUMPER ENERGY ABSORBER

(a) Engage the 2 guides to install the front bumper energy absorber.





5. INSTALL FRONT FENDER LINER RETAINER

(a) Engage the claw and install the front fender liner retainer.





HINT
Use the same procedure for the RH side and LH side.

6. INSTALL NO. 2 LOWER RADIATOR GRILLE

(a) Engage the 18 claws and install the No. 2 lower radiator grille.





7. INSTALL FRONT BUMPER HOLE COVER LH

(a) Engage the 7 claws and install the front bumper hole cover LH.





8. INSTALL FRONT BUMPER HOLE COVER RH

HINT
Use the same procedure for the RH side and LH side.

9. INSTALL FRONT LICENSE PLATE BRACKET (w/ Bracket)

(a) Engage the 2 claws.





(b) Install the front license plate bracket with the 2 screws.

10. INSTALL FOG LIGHT ASSEMBLY LH Installation

11. INSTALL FOG LIGHT ASSEMBLY RH

HINT
Use the same procedure for the RH side and LH side.

12. INSTALL RADIATOR GRILLE EMBLEM

(a) Engage the pin and 3 claws, and install the radiator grille emblem.