Audio / Visual

AUDIO / VISUAL: STEERING PAD SWITCH: INSTALLATION

1. INSTALL STEERING PAD SWITCH ASSEMBLY

(a) Engage the 4 pins and install the steering pad switch assembly.

(b) Engage the clamp and Install the 2 screws.

(c) Connect the connector to the spiral cable.

2. INSTALL STEERING PAD Installation

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Some systems need initialization when disconnecting the cable from the negative battery terminal.

4. PERFORM SYSTEM INITIALIZE Installation

5. INSPECT STEERING PAD Installation

6. INSPECT SRS WARNING LIGHT Installation