Rear Package Tray Speaker

AUDIO / VISUAL: REAR PACKAGE TRAY SPEAKER: ON-VEHICLE INSPECTION

1. INSPECT ROOF SPEAKER

HINT
Remove interior parts so that the roof speaker can be seen.

(a) Check the speaker installation.

OK:

The speaker is securely installed.

If the result is not as specified, reinstall the roof speaker.

(b) Visually check the speaker.

OK:

The cone paper of the speaker is not torn.

If the result is not as specified, replace the roof speaker.

(c) Speaker resistance check

(1) Disconnect the roof speaker connector.

(2) Measure the resistance between the terminals of the speaker.

Standard resistance:

1.5 to 2.1 Ohms

If the result is not as specified, replace the roof speaker.

2. INSPECT REAR NO. 2 SPEAKER

HINT
Remove interior parts so that the rear No. 2 speaker can be seen.

(a) Check the speaker installation.

OK:

The speaker is securely installed.

If the result is not as specified, reinstall the rear No. 2 speaker.

(b) Visually check the speaker.

OK:

The cone paper of the speaker is not torn.

If the result is not as specified, replace the rear No. 2 speaker.

(c) Speaker resistance check

(1) Disconnect the rear No. 2 speaker connector.

(2) Measure the resistance between the terminals of the speaker.

Standard resistance:

1.6 to 2.4 Ohms

If the result is not as specified, replace the rear No. 2 speaker.