Fluid - M/T: Testing and Inspection

EB62 MANUAL TRANSAXLE: MANUAL TRANSAXLE OIL: ON-VEHICLE INSPECTION

1. INSPECT TRANSAXLE OIL

(a) Stop the vehicle in a level place.

(b) Remove the filler plug and gasket.





(c) Check that the oil level is within 5 mm (0.197 in.) from the bottom of the filler plug opening.





NOTICE:
An excessively large or small amount of oil may cause problems.

(d) Check for oil leakage when the oil level is low.

(e) Install the filler plug with a new gasket.





Torque : 39 Nm (400 kgf-cm, 29 ft-lbf)