Installation

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT SEAT SIDE AIRBAG ASSEMBLY (for Manual Seat): INSTALLATION

1. INSTALL FRONT SEAT SIDE AIRBAG ASSEMBLY

CAUTION:
* The nuts must not be reused.
* Make sure that the seat frame assembly is not deformed. If it is, replace it with a new one.
(a) Install the front seat side airbag assembly with 2 new nuts.





(b) Engage the 2 clamps to connect the wire harness.

(c) Engage the 5 clamps to connect the wire harness.





2. INSTALL FRONT SEATBACK COVER WITH PAD Reassembly

3. INSTALL FRONT SEAT HEADREST SUPPORT LH

4. INSTALL FRONT SEAT HEADREST SUPPORT RH

5. INSTALL FRONT SEAT BACK BOARD SUB-ASSEMBLY

6. INSTALL FRONT INNER SEAT CUSHION SHIELD

7. INSTALL FRONT SEAT INNER BELT ASSEMBLY Installation

8. INSTALL FRONT SEAT CUSHION SHIELD (for Driver Seat)

9. INSTALL RECLINING ADJUSTER RELEASE HANDLE

10. INSTALL VERTICAL ADJUSTING HANDLE NO. 2 (for Driver Seat)

11. INSTALL VERTICAL ADJUSTER COVER LH (for Driver Seat)

12. INSTALL FRONT SEAT ASSEMBLY Installation

13. INSTALL INNER SEAT TRACK BRACKET COVER Installation

14. INSTALL SEAT TRACK COVER Installation

15. INSTALL FRONT SEAT HEADREST ASSEMBLY

16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

17. INSPECT SLIDE ADJUSTER LOCK

18. INSPECT SRS WARNING LIGHT

Check the SRS warning light Diagnosis System for TMC made, Diagnosis System except TMC made).