Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: REMOVAL

NOTICE:
Before removing the tire pressure warning ECU, read the registered transmitter IDs of all wheels and write them down to use for re-registration of transmitter IDs Registration.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE FRONT DOOR SCUFF PLATE RH Removal

3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH Removal

4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

5. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMC Made) Removal

6. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMMK Made) Removal

7. REMOVE TIRE PRESSURE WARNING ECU

(a) Remove the nut.





(b) Disconnect the connector and remove the tire pressure warning ECU.