Removal

LIGHTING: STOP LIGHT CONTROL RELAY: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

2. REMOVE FRONT DOOR SCUFF PLATE LH Removal

3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH Removal

4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH (for TMC Made) Removal

5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH (for TMMK Made) Removal

6. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY Removal

7. REMOVE STOP LIGHT CONTROL RELAY

(a) Disengage the clamp and remove the stop light control relay.





(b) Disconnect the connector.