Installation

AUDIO / VISUAL: MULTI-MEDIA INTERFACE ECU: INSTALLATION

1. REMOVE MULTI-MEDIA INTERFACE ECU ASSEMBLY

(a) Install the multi-media interface ECU assembly with the 2 nuts.





(b) Engage the clamp.





(c) Connect each connector.

2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY Installation

3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH Installation

4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH Installation

5. INSTALL FRONT DOOR SCUFF PLATE LH Installation

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

7. INSPECT SRS WARNING LIGHT

* for TMC Made: Diagnosis System

* except TMC Made: Diagnosis System