Replacement

AXLE: FRONT AXLE HUB BOLT: REPLACEMENT

1. REMOVE FRONT WHEEL

2. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY Removal

3. REMOVE FRONT DISC Disassembly

4. REMOVE FRONT AXLE HUB BOLT

(a) Temporarily install the 2 nuts and washers to the front axle hub bolt as shown in the illustration.





(b) Using SST and a brass bar or an equivalent tool to hold the front axle, remove the front axle hub bolt.

SST : 09628-10011

5. INSTALL FRONT AXLE HUB BOLT

(a) Install a washer and nut to a new front axle hub bolt as shown in the illustration.





(b) Using a brass bar to hold the front axle, install the hub bolt by torquing the nut.

6. INSTALL FRONT DISC Reassembly

7. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY Installation

8. INSTALL FRONT WHEEL

Torque : 103 Nm (1,050 kgf-cm, 76 ft-lbf)