Installation

HORN: HIGH PITCHED HORN: INSTALLATION

1. INSTALL HIGH PITCHED HORN ASSEMBLY

(a) Install the high pitched horn assembly with the bolt.

Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)





(b) Connect the connector.

2. INSTALL FRONT BUMPER ASSEMBLY Installation

3. INSTALL COOL AIR INTAKE DUCT SEAL (for 2GR-FE) Installation

4. VEHICLE PREPARATION FOR FOG LIGHT AIM ADJUSTMENT (w/ Fog Light) Adjustments

5. PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light) Adjustments

6. FOG LIGHT AIMING INSPECTION (w/ Fog Light) Adjustments

7. FOG LIGHT AIMING ADJUSTMENT (w/ Fog Light) Adjustments