Installation

2AR-FE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

(a) Install a new gasket to the engine coolant temperature sensor.





(b) Install the engine coolant temperature sensor.

Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

(c) Connect the engine coolant temperature sensor connector.

2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY Installation

3. INSTALL AIR CLEANER FILTER ELEMENT

4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (for PZEV) Installation

5. INSTALL AIR CLEANER CAP SUB-ASSEMBLY (except PZEV) Installation

6. ADD ENGINE COOLANT Testing and Inspection

7. INSPECT FOR COOLANT OIL LEAK Testing and Inspection

8. INSTALL INLET AIR CLEANER ASSEMBLY Installation

9. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Installation

10. INSTALL ENGINE UNDER COVER RH

11. INSTALL ENGINE UNDER COVER LH

12. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH

13. INSTALL FRONT WHEEL OPENING EXTENSION PAD LH