Disassembly

EXTERIOR: FRONT BUMPER: DISASSEMBLY

1. REMOVE FRONT SPOILER (w/ Front Spoiler)

(a) Remove the 2 screws, 23 clips and front spoiler.





2. REMOVE FRONT BUMPER EXTENSION LH (w/ Front Spoiler)

(a) Remove the 2 nuts and front bumper extension LH.





3. REMOVE FRONT BUMPER EXTENSION RH (w/ Front Spoiler)

HINT
Use the same procedure for the RH side and LH side.

4. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET (w/ Bracket)

(a) Remove the 2 screws.





(b) Disengage the 2 claws and remove the front bumper extension mounting bracket.

5. REMOVE FRONT BUMPER LOWER COVER (w/ Cover)

(a) Disengage the 2 claws and remove the front bumper lower cover.





6. REMOVE FRONT BUMPER HOLE COVER LH (w/o Fog Light)

(a) Disengage the 5 claws and remove the front bumper hole cover LH.





7. REMOVE FRONT BUMPER HOLE COVER RH (w/o Fog Light)

HINT
Use the same procedure for the RH side and LH side.

8. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light) Removal

9. REMOVE FRONT BUMPER HOLE COVER LH (w/ Fog Light)

(a) Disengage the 5 claws and remove the front bumper hole cover LH.





10. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)

HINT
Use the same procedure for the RH side and LH side.

11. REMOVE FRONT BUMPER HOLE COVER RH (w/ Fog Light)

HINT
Use the same procedure for the RH side and LH side.

12. REMOVE LOWER RADIATOR GRILLE

(a) Disengage the 14 claws and remove the lower radiator grille.





13. REMOVE RADIATOR GRILLE

(a) Remove the 2 screws.





(b) Disengage the 15 claws and remove the radiator grille.

14. REMOVE HOOD TO FRONT END PANEL SEAL

(a) Remove the 10 clips and hood to front end panel seal.





15. REMOVE FRONT BUMPER UPPER RETAINER

(a) Remove the 3 clips and front bumper upper retainer.





16. REMOVE RADIATOR GRILLE EMBLEM

(a) Disengage the 4 claws and remove the radiator grille emblem.





17. REMOVE FRONT BUMPER ENERGY ABSORBER

(a) Engage the 2 guides and remove the front bumper energy absorber from the front bumper reinforcement sub-assembly.





18. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY

(a) Disengage the 6 clamps.





(b) Remove the 6 bolts and front bumper reinforcement sub-assembly.

19. REMOVE FRONT BUMPER SIDE RETAINER LH

(a) Remove the screw.





(b) Disengage the claw and remove the front bumper side retainer LH.

20. REMOVE FRONT BUMPER SIDE RETAINER RH

HINT
Use the same procedure for the RH side and LH side.